RONDÒ
The Rondò boot is a combination of lightweight design and Edea technology. It offers great support and flexibility for skater’s who are looking to develop and are performing basic skills single jumps and axels. Inspired by our passion for skating, the Rondò benefits from the technology and know-how from our top of the range boots.
EASY TO SKATE
-
• Lightweight
Our boots are designed with lightness in mind making them more responsive. The lightness helps the developing skater with their feel on the floor and thus helps improve performance. -
• Control and Stability
The unique insole made with fiberglass and nylon allows more power transmission and increase the stability.
It also allow for the thickness of the sole to be reduced thus lowering the centre of gravity and giving the skater even greater control and stability.
The unique heel design adds further stability to the boot. The curve on the heel increases weight distribution, allowing the heel to be in contact with over half the insole giving the skater a sense of oneness with the floor.
The heel and the sole are positioned in perfect horizontal alignment so they are fully supported by the flat plate allowing the natural alignment of the metatarsus-phalanx. This allows the plantar-flexor muscles to remain at their optimum length allowing the muscles to react more rapidly ensuring better balance and control. -
• Lacing
Uses the same lacing system as the top models allowing for greater accuracy and feel in lacing.
Rondò also has Edea’s patented hooks and hook position meaning the laces can hold the boots without the need to strangle the leg.
EASY CARE
-
• Leather Upper
The Rondò is made from the same leather as our top of the range boots. A special water repellent treatment makes Edea skates easier to maintain. -
• Finishing Touches
In a sport where style and grace can be the difference between winning and losing Edea have added extra style to the Rondò with 3 Crystals from Swarovski® added for the final touch of elegance. -
• Latest Technology for Frame Mounting
The combination of the new Hi-tech sole, new planer concept and the specially designed hi-low (double helix) screws allows a new way quicker, less fiddly more accurate. -
• Designed and Made in Italy
Everything at Edea is done at our factory in a little village at the foot of the Alps. This means we can control design, quality and production. You buy our boots knowing they’ve been cared for from the drawing board until they are placed in the box to be sent to the shops.
For easy fitting Edea boots are available in 5mm increments and one width, C (standard).
Ivory available from size 195 to 280.
Black available from size 195 to 310.
COMFORT
-
• Ventilation
Hi-tech soles are fully ventilated allowing the foot to cool and helping the lining to dry more quickly so discouraging bacteria, preventing allergies and reducing odor.
Rondò boot has an extra ventilation on the side of the shoe allowing even greater air-flow and added comfort. -
• Wiggle Room
With the lower profile of the design because of the thin sole we’ve added an extra couple of millimetres of room for the toes for added comfort.
Because of the thinner sole our boots have a lower profile. This means we’ve been able to add an extra couple of millimeters of room for the toes for added comfort while retaining our lower profile. -
• Padded
The Rondò is padded with our top of the range microfiber fabric offering comfort and support. There is additional padding at the ankle for comfort and to hold the heel in place more firmly giving a better foot position. -
• Anatomical
All Edea skates are designed around the foot with curves and strength to hold the heel in place, to support the foot and give the best fit and maximum comfort. The Rondò is more shaped and stiffer ensuring the heel sits more firmly in its pocket giving increased comfort and better control. -
• Tongue
The tongue is key in any boot. In the Rondò the tongue is stronger than the Esordio models giving the increased support required by skaters at this level. Its anatomical shape helps the leg bend in jumps while additional padding increases the comfort.
COMING SOON…
-
Which is my correct size?
The boot is the most important part of the skater’s equipment. At Edea we’ve created boots that are highly technical tools and to work properly they need to be correctly fitted… -
How do I measure it?
To get the right size it is important to measure the foot correctly. You need to get the length of the foot in millimeters and then compare with the length of the boot… -
Can I custom shape my boot?
Having the perfect fit boot is the biggest advantage a skater can have over their rivals.
It gives the skater the extra confidence to do the hardest of routines and the increased feel means the routine can be perfectly executed… -
How can I check if I wear the correct size?
Generally, skating coaches might be able to determine if the skater has the proper boot size only by looking at the skaters during the on-roller sessions… -
Which is the correspondent frame size?
Edea design skates to maximise performance. Our specially designed sole also means we can mount wheels using shorter frames. This means an increased power ratio, reduced drag and increased maneuverability for our skaters…
-
How should I lace my skate?
It helps to keep the foot in the right position and ensures that the boot can work to its full potential and maximize performance… -
Why it is so important lace tight the instep?
-
How can I clean my skate?
Clean the boot with water and unscented soap – As the boots are waterproof this won’t damage your boots but it will
make them sparkle… -
Can I use the boot covers?
Yes you can. But if you use the Fly, Ritmo, Flamenco you are covering all the front part ventilation… It’s a pity!
