Traditional Frame Mounting

montaggio ruote tradizionaleIn the traditional mounting the two main differences with our hi-tech boots are:
viti-sottopiede1. The Heel is fixed to the boot by inner screws.
Do not remove these for safety reasons.
Removing these will invalidate the warranty and compromise the performance.
svasatore2. After drilling the sole, use the countersink tool to flare all the holes inside the boot to create space for the head of the mounting screws.

Otherwise the stages for frame mounting remain the same.
However if you use Edea’s Quick Mounting System it is less fiddly and frames can be mounted in under 5 minutes.